Hot In-Stock
Precision Fastener Portfolio
High-Integrity Titanium Hardware Available for Hungarian Importers
Direct mill fabrication from ASTM B348 certified Grade 2 and Grade 5 titanium bars. Every product meets stringent tensile, dimensional, and galvanic isolation standards tailored for central European high-stress industrial applications.
Pre-Assembled Washer
High Dynamic Load
Precision Torx
Custom Anodized
Thermal Resistant
Micro Hardware
Forged High-Spec
Technical Engineering Insight
The Science of Titanium Fender Washers: Load Spreading & Anti-Galling Integrity
A technical assessment for mechanical engineers and tier-1 procurement managers in Miskolc demanding extreme tensile strength, low inertia, and zero electrochemical degradation.
Unlike standard plain washers manufactured under DIN 125, Titanium Fender Washers (DIN 9021 / ISO 7093 standard equivalent) feature an extended outer diameter proportionally three times greater than the nominal inner bolt clearance. In lightweight structural assemblies across Northern Hungary's industrial zones, the primary failure mode of sheet steel, thin composite laminates, and soft aluminum casings is localized bearing failure under cyclic dynamic clamp loads. Through the high elastic compliance and exceptional yield characteristics of ASTM B348 Grade 5 (Ti-6Al-4V), Yevzo titanium fender washers effectively expand the cone of pressure, eliminating punch-through stress while shedding nearly 45% of hardware tare weight.
| Mechanical / Metallurgical Property | Yevzo Grade 5 (Ti-6Al-4V) | Grade 2 (Commercially Pure) | Austenitic Steel (A2 / A4-70) |
|---|---|---|---|
| Yield Strength (Rp0.2 Min.) | 828 MPa | 275 MPa | 450 MPa |
| Tensile Strength (Rm Min.) | 895 – 1050 MPa | 345 MPa | 700 MPa |
| Specific Mass (Density) | 4.43 g/cm³ | 4.51 g/cm³ | 7.90 g/cm³ |
| Modulus of Elasticity (E) | 114 GPa | 103 GPa | 193 GPa |
| Passivation Film Mechanism | Instant TiO₂ Self-Healing | Instant TiO₂ Self-Healing | Passive Chromium Oxide (Cr₂O₃) |
| Galvanic Corrosion Index vs Carbon Fiber | Inert / Compatible (<0.10V) | Inert / Compatible (<0.10V) | High Risk of Pitting / Anodic Attack |
*Data verified against ASTM B348, ISO 3506-1, and DIN 9021 dimensional profiles. Grade 5 structural washers undergo cold stamping, CNC surface flattening, and edge radiusing to eliminate stress risers under heavy cyclic torque.
Regional Industrial Integration
Localized Applications Across Miskolc's Manufacturing Ecosystem
Deploying advanced titanium fasteners within the Miskolc South Industrial Park, Mechatronics Innovation Hubs, and heavy mechanical infrastructure.
Tier-1 Automotive & EV Sub-Assemblies
Miskolc’s automotive supplier network manufactures high-output starters, alternator brackets, drive electric inverters, and battery containment enclosures. Yevzo’s Grade 5 fender washers prevent galvanic battery housing erosion and mitigate localized vibration cracking on high-voltage chassis grounding pads.
Precision Mechatronics & Tool Making
Collaborating with precision tooling workshops and robotic integration lines near the University of Miskolc, our washers deliver exact clamping planar perpendicularity. They insulate dynamic sensors against hysteresis distortion caused by localized thermal differential expansion.
Chemical & Heavy Metallurgical Processing
Operating in environments influenced by historical metallurgical operations and modern chemical industrial plants along the Sajó Valley, CP Grade 2 and Gr5 washers offer absolute chemical immunity against sulfurous compounds, chlorides, and humid atmospheric degradation.
Industry 4.0 & Supply Chain Resilience
Macro Sourcing Trends Driving Titanium Adoption in Hungary
How procurement directors across Central Europe are securing factory-direct titanium ties to safeguard against material bottlenecks and meet carbon reduction quotas.
Total Cost of Ownership (TCO) vs 316L
While austenitic stainless steels show nominal affordability, periodic galling, thread binding, and stress-corrosion replacement cycles multiply field service expenditures. Titanium fender washers eliminate maintenance outages, achieving superior multi-year TCO.
Lightweighting for E-Mobility Efficiency
As Hungarian automotive manufacturing converts internal production capacities to electric powertrains, gram-level weight conservation on structural and bracket hardware contributes directly to vehicle range extension and battery safety cell isolation.
Baoji-to-Miskolc Freight Corridor Efficiency
By bypassing European multi-tier stocking middlemen, Hungarian original equipment manufacturers access mill-traceable titanium hardware via express air freight (5–7 days) or consolidated direct rail/ocean corridors under complete DDP/DDU contractual terms.
Factory Floor Mastery
Direct-From-Source Engineering: Yevzo Titanium Metal Co., Ltd.
Established in 2013 within Honeycomb Industrial Park, Fenghuang 3rd Road, High-Tech Development Zone, Baoji, Shaanxi, China, Yevzo is located at the center of "China’s Titanium Valley." We control the manufacturing chain from raw sponge ingot selection and certified ASTM B348 bar extrusion to advanced Swiss multi-axis turning and high-speed stamping.
- Full Lot Heat Traceability: EN 10204 3.1 chemical composition and mechanical test certification on every batch.
- Advanced CNC Machining Park: 100+ precision units ensuring concentricity within ±0.01 mm and spotless edge deburring.
- Surface Modification: Proprietary PVD vacuum plating, micro-arc oxidation, and electrochemical color anodizing.
- Commercial Clarity: Flexible low-barrier MOQs for testing, accepting EUR/USD payments via T/T, L/C, and PayPal.
Production Floor
CNC Machining Park
Raw Stock Traceability
Automated Sorting & QC
Procurement Knowledge Base
Frequently Asked Questions by Hungarian Buyers & Engineers
Addressing the technical, logistics, and quality assurance queries common to Borsod-Abaúj-Zemplén purchasing agents.
Why choose Grade 5 (Ti-6Al-4V) fender washers over Grade 2 for automotive applications? +
Grade 2 commercially pure titanium possesses a minimum yield strength of 275 MPa, which is well-suited for chemical wash tanks, marine ducting, and non-load-bearing trim panels. In contrast, Grade 5 (Ti-6Al-4V) offers an outstanding yield strength exceeding 828 MPa and tensile capacity over 895 MPa. For critical automotive mounting, chassis reinforcement, and suspension brackets, Grade 5 washers ensure no dishing, deformation, or loss of bolt pre-load under intense dynamic torque.
How do titanium washers behave when joined with carbon fiber and aluminum components? +
Titanium features an inherent electrode potential closely aligned with carbon graphite fibers, making it the industry-standard fastener material to prevent galvanic oxidation in CFRP structures. When mating with soft aluminum structural panels (common in modern EV design), a titanium fender washer acts as an unyielding, non-reactive intermediary plate, spreading the bolt clamping force and mitigating galvanic potential attack when paired with non-conductive pastings.
What are the standard shipping timelines and Incoterms available for shipments to Miskolc? +
We provide door-to-door delivery throughout Hungary under DDP, DAP, CIF, and FOB terms. Air express shipments (via DHL, FedEx, UPS) typically arrive in Budapest or Miskolc within 4 to 7 business days for prototypes and smaller volume production orders. Scheduled batch supply contracts can be routed via standard consolidated ocean freight (landing at European hub ports) or Sino-Euro direct rail lines for balanced transit time and freight cost.
Can Yevzo manufacture custom outer diameter (OD) and thickness dimensions from engineering CAD drawings? +
Yes. Beyond standard DIN 9021, ISO 7093, and DIN 125 dimensional profiles, our on-site Baoji production workshop turns, stamps, and laser-cuts bespoke geometries based on 2D blueprints (PDF, DWG) and 3D solid models (STEP, IGES). Custom chamfers, countersunk head seats, serrated anti-slip faces, and knurling can be integrated directly into production runs.
How does electrochemical color anodizing impact dimensional accuracy and corrosion performance? +
Titanium anodization is an electro-chemical passivation process that regulates the precise thickness of the naturally occurring titanium dioxide (TiO₂) film. Unlike industrial painting, plating, or thick powder coating, anodizing adds zero measurable dimensional variation (<0.5 microns), preserving critical design clearances while bolstering surface passivity and offering custom visual color indexing (gold, blue, purple, burnt rainbow) for racing and assembly line sorting.
Connect Directly With Our Baoji Engineering Team
Need custom-machined prototypes, material certification test sheets, or volume container quotes for your Miskolc plant? Submit your bill of materials (BOM) or 2D/3D part drawings for a guaranteed technical consultation and quote within 24 hours.
Direct Factory Contact Channel
Email: [email protected]
Baoji High-Tech Industrial Zone, Shaanxi, China
Incoterms: DDP, CIF, FOB | Certified to ISO & ASTM Standards